Gentex Archives - Top Fire Safety Product & Review

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex GN-303 Photoelectric Smoke Alarm Review

by CheatingMutant July 24, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Horn frequency 3150 Hz (Nominal) Nominal 2.5% sensitivity Push button test feature On-site maintenance washing program Includes battery drawer on side of unit to allow for battery replacement without removing unit from wall or ceiling Includes low or missing battery indicator Quick-disconnect wiring harness Sure-Lock™ locking pin to detour alarm tampering Dust-Cover included to keep units dust free until occupancy Temporal 3 evacuation sounding device Pulsing LED sensing chamber Easy Wash&

Under Power source it says “battery-powered”. This is not battery powered, It hooks up to 120v power and has a battery backup. Because it says battery powered I have to accept a return and pay for the return shipping. Please change ASAP.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex 913 Smoke Alarm, 9V Battery Powered Photoelectric w/T3 Horn (909-0133-002) Review

by CheatingMutant July 22, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Available in 9 volt battery 85 dBA at 10 feet, temporal 3 evacuation piezo horn Nominal 2.5% sensitivity Patented 3-position test switch 5 to 1 signal to noise ratio Pulsing IR LED sensing chamber Non-latching Fully insect protected Wall or ceiling mountable Easy Wash – on site maintenance washing program Mounting hardware Shrink wrapped to prevent contamination during installation

› See more product details

The Gentex 913 is a photoelectric single station smoke alarm. It’s designed for 9V battery operated use. This Gentex smoke alarm features a temporal 3 (T3) audible signal for evacuation. This model uses photoelectric sensing technology to detect dangerous smoke conditions.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex 7139CS-W Hardwired Photoelectric Smoke Alarm w/ ADA Compliant Strobe Review

by CheatingMutant July 19, 2018 No Comments

The gentex 7139cs-w is a photoelectric smoke alarm designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels/motels. The 7139cs-w is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The 7139cs-w is ANSI/UL 217 and ANSI/UL 1971 listed and is compliant with ibc/ifc standards as well as NFPA 72. . 120 vac with 9Vdc battery back-up . 90Dba temporal 3 evacuation piezo horn with a 3100Hz (nominal) horn frequency . Ada compliant 177 candela strobe (ANSI/UL 1971) . Wall mount . On-site washing program . Nominal 2. 5% sensitivity . 3 position test switch . Form c contact included . Tandem interconnect with all gentex tandem capable alarms . Low or missing battery indicator . Relays operate on battery back-up and will activate from tandem wire . Quick disconnect Wiring harness . Fully insect screened . 1 year warranty from date of purchase.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex GB6-120 Fire Alarm Bell (120VAC/6″) Review

by CheatingMutant July 16, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Gentex GB6-120

120VAC 6″ Fire Alarm Bell for emergency systems

Combination Smoke and Carbon Monoxide Detectors Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex GN-503 Smoke & Carbon Monoxide Alarm, 120V Hardwired Interconnectable Photoelectric w/9V Battery Backup & T3 & T4 Horns (918-0005-002) Review

by CheatingMutant July 7, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Horn frequency 3100 Hz (nominal) Meets sensitivity requirements of ANSI/UL 2034 Relay contacts operate on battery back-up Push button self-test feature Push button functional test feature Quick-disconnect wiring harness Non-latching (self-restoring) alarm Fully insect protected Red LED pulses every 30 seconds, green LED for AC power on Mounting hardware adapts to standard junction boxes, including but not limited to 4x4x2-1/8 octagon Dust cover to prevent contamination during installation Low or

› See more product details

The Gentex GN503 is a single or multiple station combination smoke and carbon monoxide alarm. It’s designed for 120V hardwired use and features a 9V battery backup for ensured safety even when power is lost. This Gentex smoke/carbon monoxide alarm features a temporal 3 (T3) audible signal for smoke detection and a temporal 4 (T4) audible signal for carbon monoxide evacuation. This model features a universal mount that can be use for ceiling or wall applications.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

GENTEX AC/DC PHOTO SMOKE ALARM – 9120 (with Temporal 3 Evacuation Piezo Sounder) Review

by CheatingMutant July 2, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

20VAC with 9VDC battery back-up
n compliance with ANSI/UL 217, applicable IBC/IFC/IRC Standards and NFPA 72
with Temporal 3 Evacuation Piezo Sounder

› See more product details

Carbon Monoxide Detectors Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex CO1209F Carbon Monoxide Alarm, 120V Hardwired Interconnectable w/9V Battery Backup, T4 Horn, A/C Contacts (918-0010-002) Review

by CheatingMutant June 29, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Electrochemical sensor Horn frequency 3100 Hz (nominal) Meets sensitivity requirements of ANSI/UL 2034 DUALINK – differentiating tones indicating a smoke alarm (temporal 3) or a CO alarm (temporal 4) Temporal 4 sounding pattern for CO annunciation Auxiliary Form A/Form C relay contacts Relay contacts operate on battery back-up Tandem interconnect with current Gentex alarm models Push button self-test and functional test feature Quick-disconnect wiring harness Non-latching (self-restoring) alarm

› See more product details

The Gentex CO1209F is a single or multiple station electrochemical carbon monoxide alarm. It’s designed for 120V hardwired use and features a 9V battery backup for ensured safety even when power is lost. This Gentex carbon monoxide alarm features a temporal 4 (T4) audible signal for evacuation. This model features a universal mount that can be use for ceiling or wall applications. This Gentex carbon monoxide alarm also includes auxiliary Form A/Form C relay contacts for initiating remote functions and annunciation.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

GENTEX GIDDS-2498782 2498782 Photoelectric Smoke Alarm, Hardwired With Battery Backup And Relay Contacts, Interconnected, Wall Mount Review

by CheatingMutant June 23, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

The 9123F is designed to eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required
This product belongs to electrical & heating Group
Item is manufactured in United states

› See more product details

The 9123F is a 120VAC with 9Vdc battery back-up photoelectric smoke alarm designed for residential and commercial residential applications, including homes, apartments, hospitals, hotels/motels. The 9123F is designed to eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. The 9123F is ANSI/UL 217 and ANSI/UL 1730 listed and is compliance with ibc/ifc standards as well as NFPA 72. . 90Dba temporal 3 evacuation piezo horn with a 3100Hz (nominal) horn frequency . On-site washing program . Nominal 2. 5% sensitivity . Form a/form c relay contacts . Relays operate on battery back-up . 3 position test switch . Quick disconnect Wiring harness . Interconnect with all gentex tandem capable alarms . Fully insect screened . Low or missing battery indicator . 1 year warranty from date of purchase.

Smoke Detectors and Fire Alarms Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex 9120F, P/E Smoke Detector, 120VAC w/Piezo Sounder, Form A/C Contacts, 9V Backup Review

by CheatingMutant June 17, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

For use with your Sensaphone Remote Monitoring System
Battery back up for reliability
Use less wire with tandem installation option
Dimensions: 6 1/2″ diameter x 2 5/8″ H
Warranty: 1 year, limited

› See more product details

Photoelectric smoke alarm with patented 3-position test switch. Applications include residential and commercial residential occupancies.

Carbon Monoxide Detectors Fire Safety, Gentex, Safety & Security, Tools & Home Improvement

Gentex CO1209 Carbon Monoxide Alarm, 120V Hardwired Interconnectable w/9V Battery Backup & T4 Horn (918-0009-002) Review

by CheatingMutant June 16, 2018 No Comments

This fits your .

Make sure this fits by entering your model number.

Electrochemical sensor Horn frequency 3100 Hz (nominal) Meets sensitivity requirements of ANSI/UL 2034 DUALINK – differentiating tones indicating a smoke alarm (temporal 3) or a CO alarm (temporal 4) Temporal 4 sounding pattern for CO annunciation Relay contacts operate on battery back-up Tandem interconnect with current Gentex alarm models Push button self-test and functional test feature Quick-disconnect wiring harness Non-latching (self-restoring) alarm Red LED pulses every 15-30 seconds, gre

› See more product details

The Gentex CO1209 is a single or multiple station electrochemical carbon monoxide alarm. It’s designed for 120V hardwired use and features a 9V battery backup for ensured safety even when power is lost. This Gentex carbon monoxide alarm features a temporal 4 (T4) audible signal for evacuation. This model features a universal mount that can be use for ceiling or wall applications.